juice pack air
for iPhone 6s, iPhone 6
You Might Also Enjoy
Everyday protection. All day power.
Smart battery technology offers a safe, quick charge that provides more than 100% extra battery for the days that don’t end when you leave the office.
Protective yet compact design
Durable outer-band, raised bezel edge and rubberized support pads inside of full-case protection guard your phone from drops and hard falls all with a slim design.
2,750mAh delivers more than 100% extra iPhone battery life. See additional hours broken down below.
Durable outer-band and rubberized support pads add to the full-case protection for extra security.
Priority+ Charge & Sync
Enables pass-through charge & sync while connected to a computer. Your iPhone 6s/6 recharges first, and then the mophie juice pack case recharges itself.
Charge anywhere by flipping a switch
Integrated standby switch allows you to choose when to charge or save some juice for when you need it most. The LED power indicator displays the juice pack battery levels and charge status. Know before you go.
2 Year Warranty
2.92 x 6.10 x 0.61 in (74.2 x 154.9 x 15.5 mm)
3043, 3044, 3045, 3047, 3187, 3046, 3185, 3186
WARNING: Cancer & Reproductive Harm www.P65Warnings.ca.gov
Charging Cable (Micro-USB Cable)
How does the extra battery work?
When you slide your phone into the juice pack case, a connector at the base of the case plugs into the port at the bottom of the phone. Flip the standby switch on the back of the case from red to green to start charging your phone. After using up all the power in the juice pack case, just recharge it with the included micro USB cable for more on-the-go power.
What is the best method for charging my iPhone using the juice pack case?
Assuming that your iPhone and juice pack case are both fully charged, we recommend waiting until your iPhone has 20% battery left. When the phone’s in the red, flip the juice pack case’s standby switch to green and let the case do the heavy lifting. The phone requires more power to charge past 80%, so if you want to get the greatest battery boost from the juice pack case, we suggest flipping back to standby mode until your phone battery is low again. This isn’t the end-all-be-all, but we like it.
Does the juice pack case block the speaker, microphone, camera, or any other ports?
Of course not. In fact, the juice pack case is designed to act as a virtual speaker box! Sound is redirected from the bottom of the phone to the front, resulting in a richer, fuller sound quality.
What is the best method for charging my juice pack case?
After using up all the power in the juice pack case, connect it to a power source using the included micro USB cable. You can plug the cable into your computer or any power source with a USB out, like the USB wall adapter included with your iPhone. You do not need to remove your phone from the juice pack case to charge. In fact, leaving your phone in the juice pack case while charging will actually charge both your phone and the case together!
Does the juice pack case interfere with my phone’s antenna reception?
Not a chance.
Why aren’t the LEDs blinking while my juice pack case is charging?
After connecting the juice pack case to a power source, the LED status indicators will start blinking to indicate charging. The lights will turn off after 30 seconds allowing for a good night’s rest. Remember to check the status indicator before you disconnect. When all four LEDs are lit, your juice pack case is fully charged.
How do I insert my iPhone into the juice pack case?
1) Separate the juice pack case sections.
2) Slide your iPhone all the way into the bottom section of the juice pack case so that the juice pack case’s Lightning connector is fully inserted into the phone. 3) Slide the top section of the juice pack case all the way over the exposed top of the iPhone so that it snaps into the bottom section of the case.
1) While holding down the back of the juice pack case, pull up on the front corner with your thumb to separate the case sections.
2) Keeping it flat against the case, slide your iPhone straight down onto the Lightning connector in the bottom of the juice pack case back.
3) Fit the juice pack case front section onto the back section.
4) Press the two juice pack case halves together at all four corners. The case will audibly snap at each corner when it is successfully closed.