juice pack

Slim, protective battery case

for iPhone 6s Plus, iPhone 6 Plus

In Stock & Ships Free
SKU
JP-IP6P
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 9.18ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Don't let the thin design fool you. This case provides more than 14.5 hours of talk time and high-impact protection for your iPhone 6s Plus / 6 Plus to keep you connected and equipped for the day ahead.
2 Year WarrantyWe warrant these products against defects in materials and workmanship under normal use for a period of 2 Years, as applicable, from the date of retail purchase by the original end-user consumer.

Reliable power in an ultra-thin design

Our thinnest iPhone juice pack yet is perfect for when you need an extra boost to make it through the day. The high-density battery provides over 14.5 hours of extra talk time for your iPhone 6s Plus / 6 Plus to ensure you’re connected when you need it most.

Full protection with an ultra-slim design

Rubberized support pads inside of full case protection guards your phone from drops and hard falls.

Additional hours

2,600mAh delivers more than 60% extra iPhone battery life. See additional hours broken down below.

High-impact protection

Edge-to-edge protection and built-in rubberized support pads protect your phone from everyday wear and tear.

Priority+ Charge & Sync

This mophie extended battery case for iPhone 6 plus enables pass-through charge & sync while connected to a computer. Your iPhone 6s Plus/6 Plus recharges first, and then the juice pack case recharges itself.

Charge anywhere by flipping a switch.

Integrated standby switch allows you to choose when to charge or save some juice for when you need it most. The LED power indicator displays the juice pack battery levels and charge status. Know before you go.

Warranty

2 Year Warranty

Dimensions

3.27 x 6.85 x 0.57 in (83.1 x 174.0 x 14.5 mm)

Weight

0.0156

Product SKUs

3084, 3085, 3086

Capacity

2,600mAh

Notice

WARNING: Cancer & Reproductive Harm www.P65Warnings.ca.gov

juice pack
Quick-Start Guide
Charging Cable (Micro-USB Cable)
Customer Questions
How does the extra battery work?

When you slide your phone into the juice pack case, a connector at the base of the case plugs into the port at the bottom of the phone. Flip the standby switch on the back of the case from red to green to start charging your phone. After using up all the power in the juice pack case, just recharge it with the included micro USB cable for more on-the-go power.

What is the best method for charging my iPhone using the juice pack case?

Assuming that your iPhone and juice pack case are both fully charged, we recommend waiting until your iPhone has 20% battery left. When the phone’s in the red, flip the juice pack case’s standby switch to green and let the case do the heavy lifting. The phone requires more power to charge past 80%, so if you want to get the greatest battery boost from the juice pack case, we suggest flipping back to standby mode until your phone battery is low again. This isn’t the end-all-be-all, but we like it.

Does the juice pack case block the speaker, microphone, camera, or any other ports?

Of course not. In fact, the juice pack case is designed to act as a virtual speaker box! Sound is redirected from the bottom of the phone to the front, resulting in a richer, fuller sound quality.

What is the best method for charging my juice pack case?

After using up all the power in the juice pack case, connect it to a power source using the included micro USB cable. You can plug the cable into your computer or any power source with a USB out, like the USB wall adapter included with your iPhone. You do not need to remove your phone from the juice pack case to charge. In fact, leaving your phone in the juice pack case while charging will actually charge both your phone and the case together!

Does the juice pack case interfere with my phone’s antenna reception?

Not a chance.

Why aren’t the LEDs blinking while my juice pack case is charging?

After connecting the juice pack case to a power source, the LED status indicators will start blinking to indicate charging. The lights will turn off after 30 seconds allowing for a good night’s rest. Remember to check the status indicator before you disconnect. When all four LEDs are lit, your juice pack case is fully charged.

How do I insert my iPhone into the juice pack case?

For top-load juice pack cases: (Click to view)

1) Separate the juice pack case sections.

2) Slide your iPhone all the way into the bottom section of the juice pack case so that the juice pack case’s Lightning connector is fully inserted into the phone. 3) Slide the top section of the juice pack case all the way over the exposed top of the iPhone so that it snaps into the bottom section of the case.

For front-load juice pack cases: (Click to view)

1) While holding down the back of the juice pack case, pull up on the front corner with your thumb to separate the case sections.

2) Keeping it flat against the case, slide your iPhone straight down onto the Lightning connector in the bottom of the juice pack case back.

3) Fit the juice pack case front section onto the back section.

4) Press the two juice pack case halves together at all four corners. The case will audibly snap at each corner when it is successfully closed.

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 7.21ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Manual